Skip to content

Blog · Small business

How do I start bidding for public sector tenders?

Start with one contract you can prove you've done: search Find a Tender by keyword and CPV code, check every requirement, and bid small first.

Start with one contract you can prove you've done. Search Find a Tender by keyword and CPV code for work like yours, then read the specification and scoring to check you meet every requirement. Register on Find a Tender when you decide to bid; it's free. For a first bid, aim for a smaller advertised contract or a subcontract.

Public sector tenders can bring steady work, but the first one can be overwhelming: new portals, new rules and a long pack of documents. This guide is based on interviews with experienced bid writers, the Procurement Act 2023 and its guidance, and our own work with small businesses.

The route to a first bid is the same every time. Each step has its own section below.

Your first tender, from search to submission
  1. Know what you can prove
  2. Search Find a Tender
  3. Check every requirement
  4. Decide whether to bid
  5. Register on Find a Tender
  6. Write and submit the bid

Is my business ready to bid?

You're ready when you can prove you've delivered similar work, you can carry the costs of the contract until you're paid, and you have the basics most tenders ask for:

  • your legal entity and trading details, and often bank details
  • examples of similar work, or references from past clients
  • insurance
  • CVs and experience of the team who will deliver
  • often a risk register: what could go wrong and what you'll do about it

For contracts above the threshold, the Procurement Act 2023 removes some common worries:

TopicA buyer can'tA buyer can
AccountsAsk for audited accounts, unless the law already requires yours to be auditedLook at other evidence of your finances if your accounts don't have to be audited
InsuranceRequire you to hold the contract's insurance before the contract is awardedRequire it from the start of the contract, and ask for evidence, such as a letter from an insurer
ExperienceRequire that you've already held a contract with one particular public bodyAsk for relevant experience, including public sector experience
What a buyer can and can't ask for, above the threshold

Below the threshold the Act doesn't set these limits, so check what each buyer asks for.

Who shouldn't bid yet?

There's no official test, so this is our guidance. Wait if one of these is true:

  • Cash flow. Under the Act, public buyers must pay a valid, undisputed invoice within 30 days, with some exceptions, and the same applies below the threshold. You still pay your people and costs first. If your business can't carry that gap, a contract can hurt you even when you win it.
  • Capacity. You need the people to deliver from the start date, and the time to write the bid. If the contract is bigger than your team and you can't show how you'd grow, start smaller.
  • Proof. If you have no similar work to point to yet, build it first, for example as a subcontractor.

What do I need to register?

You register on Find a Tender, the government's Central Digital Platform, when you decide to bid. Registration is free, and you sign in with a GOV.UK One Login. Have this ready:

  • your organisation's name and address
  • your Companies House number or equivalent (without one, the platform gives you an identifier)
  • your VAT number, if you have one
  • your latest accounts
  • details of connected persons, such as people with significant control
  • your answers to the exclusion questions, for example about certain convictions or insolvency

When you bid, you generate a share code from your profile and submit it the way the buyer asks. If you registered on the old Find a Tender service, you need to register again.

Where do I find public sector tenders?

On Find a Tender. It's free to search, and since 24 February 2025 new tenders under the Act are published there, including lower-value ones.

You search with keywords and CPV codes. CPV (Common Procurement Vocabulary) codes are standard codes buyers use to label what they're buying, and tender notices include them. Find a Tender lets you browse the codes and filter on them.

  1. Pick your keywords. Describe your work in the words a buyer would use.
  2. Add CPV codes. Browse the codes in Find a Tender and filter on the ones that match your work.
  3. Narrow the results. Filter by location and value, and tick "suitable for SMEs".
  4. Save the search. Sign in and save it, so new notices come to you by email.
  5. Open a few notices. Look at what they ask for: contract size, timeline, requirements and certifications.

Contracts Finder now mainly holds procurements started under the old rules. It's still useful for research: you can search its awarded contracts to see what buyers have bought before.

Elsewhere in the UK: Scottish buyers use Public Contracts Scotland, with free alerts and Quick Quotes for low-value work. Welsh notices appear on Sell2Wales and Find a Tender. Many Northern Ireland buyers use eTendersNI.

What's the easiest kind of contract to start with?

An advertised contract below the threshold, from a buyer near you, where you meet every requirement. If that's still too big, a subcontract under a larger supplier.

The contract's value decides how it's bought:

Value, including VATMost buyers, such as councilsCentral governmentHow it's usually bought
Low valueUnder £30,000Under £12,000Buyers don't have to publish a notice on Find a Tender, even when they advertise
Middle band£30,000 to £207,720£12,000 to £135,018If the buyer invites tenders from anyone, it must publish a notice on Find a Tender
Above the thresholdOver £207,720Over £135,018The full procedures of the Act, with minimum time limits
How goods and services contracts are usually bought, by value

For low-value work, buyers can ask a few suppliers they choose for quotes. In our experience many do, because a full tender costs too much for a small job.

The middle band is a good place for a first bid. When the buyer invites tenders for these contracts, it can't use a separate suitability stage to limit who may bid, though it can still check suitability when it awards the contract. This rule doesn't cover works contracts above the goods and services threshold, contracts awarded under a framework, or Welsh devolved buyers. The buyer may also reserve the contract for small businesses. A buyer can still invite only suppliers it has chosen, so not every contract in this band is advertised.

We find smaller contracts are often less strict about where your experience comes from: similar work for private clients can count. You still have to meet every requirement.

Subcontracting. If a contract is too big, or you can only deliver part of it, offer that part to a supplier who bids for the whole. You see how a public contract runs and build the proof for your own first bid. The 30-day payment term also applies to subcontracts under a public contract.

Is this tender worth bidding on?

Only if you can do the work, prove you've done it, and nobody else can obviously prove it better.

A bid writer we interviewed compares bidding to poker: you pay to join before you see the other hands, and the stake is the time the bid takes. So for every scored question, ask:

  1. Can we do it?
  2. Can we prove we've done it? Recent work, in the same sector, at a similar size.
  3. Can someone else prove they've done it better?

Then check the money: the days delivery takes against the budget, the payment terms and the travel. Our guide on deciding whether a tender is worth bidding on covers this step in detail.

What does a good bid look like?

A good bid answers exactly what the buyer asked, in the order they asked it, with proof for every claim.

First-timers we talk to often don't know what a good bid looks like. A bid writer we interviewed put the difference this way: "The amateur will talk about what they do. The pro will talk about what they do and how it fits the criteria."

  • Structure your answer as the question. Each scored question becomes a heading, and each thing it asks for a subheading.
  • Make the link obvious. The people scoring are busy and may not be experts in your field. Say how each point meets their requirement.
  • Prove, don't promise. "We'll make sure everyone is engaged" is a promise. A past project with who it was for, how many took part and what came out of it is proof.
  • Check the details. Numbers that don't add up, inconsistencies and spelling mistakes cost marks. Follow the format, the page limits and the submission rules.
  • Ask clarification questions early, because answers can take a week to ten days, and start with the easy questions while you wait.
  • Get a second reader who knows your work, but not every detail, to check it reads clearly.

How long will my first bid take?

Plan for a week or two of work on your first bid. That's our experience; we found no reliable published figure.

A first bid takes longer because nothing exists yet: no answer library, no ready case studies, no feel for which tender to pick. Here is how that compares:

1–2 weeks

of work on a first bid

TenderSeal's experience; no reliable published figure

4–5 days

an experienced bid writer spends on a typical bid

Bid writer interviewed by TenderSeal

So start the day the notice appears.

Your second bid should be faster, because your policies, case studies and team CVs carry over. TenderSeal, bid writing software for suppliers without a bid team, is built to shorten the rest: it checks each eligibility requirement against your company profile, team and track record, tells you if a tender is worth bidding on, and drafts your answers in less time.

Frequently asked questions

Do I need to be a limited company to bid?

No. We found no rule that only limited companies can bid, and you can register without a Companies House number. The Act requires buyers to consider barriers for small businesses. A buyer can still set conditions a very small business can't meet, so check each tender.

Aren't most contracts decided before they're published?

The Act sets rules against it. Buyers who talk to the market first must take steps so no supplier gains an unfair advantage, and exclude a supplier whose advantage can't be avoided. They must also take all reasonable steps to manage conflicts of interest. In our view, an incumbent still knows the buyer well. If a specification reads as if it was written for one supplier, your time is probably better spent elsewhere.

Do I need a bid writer?

We'd say not for a first, smaller bid. You know your work and your proof better than anyone. A bid writer helps most on large or complex bids, or when you don't have the time. Later bids get easier too, because your answers and proof carry over.

This is general information, not legal advice.

Bring the tender. We’ll help with the rest.

TenderSeal reads the tender, answers your questions about it, and drafts your response to the scorecard.